The information in this article applies to the following products:
- SwyxPhone L6xx Desktop Telefone (Unify Openstage)
- SwyxPhone L6x Desktop Telefone (Unify Openscape CP)
- SwyxPhone L7x Desktop Telefone (Unify Openstage CP 2nd Gen)
Summary
The information in this article applies to SwyxPhone L6xx, L6x and the latest L7x series of desk phones.
Information
The following overview gives a summary of the supported SwyxPhone firmware versions for different Swyx versions from Swyx 13.
Enreach always recommends the latest firmware version, which is recognized by the highest firmware version number.
Further details about the different firmware versions can be found in the Release Notes.
The last four firmware versions can be found here: ftp://ftp.swyx.com/pub/swyxphonefw/
L7x (Openscape CP2)
| Swyx |
13.20 (L71/L72 only) |
13.25/26 (L71/L72/L77 only) |
≥13.27 | 14 |
| HFA V2 R0.12.1 | supported |
supported |
supported |
supported |
| HFA V2 R0.10.0 | - |
- |
supported |
- |
| HFA V2 R0.8.0 | supported | supported |
supported |
- |
| HFA V2 R0.5.0 | supported (L72 only) |
supported (L72/L77 only) |
- | - |
| HFA V2 R0.3.1 | supported (L71 only) |
supported (L71 only) |
- | - |
L6x (Openscape CP)
| Swyx | 13.00 | ≥13.1x | 14 |
| HFA V1 R8.2.0 | supported | supported | supported |
| HFA V1 R7.3.0 | supported | supported | supported |
| HFA V1 R6.3.0 | supported | supported | - |
| HFA V1 R5.6.1 | supported |
- |
- |
| HFA V1 R5.4.3 | supported | - | - |
L6xx (Openstage)
| Swyx | 13 | 13.x | 14 |
| HFA V3.0.42.1 | supported | supported | supported |
Comments
0 comments
Article is closed for comments.