SIP Provider NetStream Voice SIP Connect (CH)

Enreach Info
Enreach Info
  • Updated
On 1.6.2020 Nexphone AG took over all customers and services of Netstream and outsourced them to the subsidiary company netvoip AG.

The Voice SIP Connect Trunk from netvoip (former NetStream) was first tested and released with a  SwyxWare 2015 R2. 

The Voice SIP Connect Trunk from netvoip (ex. NetStream) is a SIP trunk with user authentication. You have received information about UserID, UserName and UserPassword, whereas the naming may differ, or you might have only received UserName and -password. In this case, UserID and UserName are identical. Additionally you will receive an individual SIP Registration domain.

Platforms 

SwyxWare
The Voice SIP Connect Trunk from netvoip can be used from SwyxWare 2015 R2. When using an earlier version of SwyxWare incompatibilities cannot be excluded and use is at your own risk.

SwyxON
The Voice SIP Connect Trunk from netvoip is suitable for central connection in the data center.

Configuration 

During creation of the SIP Trunkgroup, profile 'NetStream Voice Connect (CH)' still has to be  selected.
The information about the SIP Registration domain must be entered into the field "Realm" in the "SIP" tab of the Trunkgroup properties.

In order to assign incoming calls to the correct trunk, it is necessary to configure a SIP URI for the trunk. The assigned number block and the numberformat must be considered.

Example 
Numberblock: +41 66 1234560 ... +41 66 1234569
In this case, the SIP URI must be entered in the format 4166123456*@*.

For your convenience the generated CustomProviderProfiles.config is available for download at the end of this article. Extended information about how to use this file can be found at Configuration and Adaptation of SIP Providers via Provider Profiles.


Tested Features 

  • Incoming/outgoing national calls
  • Incoming/outgoing international calls
  • Correct Calling Line Identification (CLI) on national and international calls
  • CLIP No Screening
  • Holding and retrieving calls
  • Toggeling between two calls
  • Call transfer
  • Conferencing
  • Mutually supported codecs: G.711a/ G.711µ/ G.729/ T.38 for FAX Transmission
  • Incoming/outgoing DTMF signaling in accordance with via RFC2833
  • T.38 negotiation and FAX Transmission.

Test date:
14/05/2015 with SwyxWare2015 R2

CustomProviderProfiles NetStream Voice SIP Connect (CH) 
kb4709_CustomProviderProfiles_NetStream(CH).zip

The third-party contact information included in this article is provided to help you find the technical support you need. This contact information is subject to change without notice. Swyx in no way guarantees the accuracy of this third-party contact information nor is responsible for it's content.

Was this article helpful?

0 out of 0 found this helpful

Have more questions? Submit a request

Comments

0 comments

Article is closed for comments.